Author Correction: UV-cured Polymer Solid Electrolyte Reinforced using a Ceramic-Polymer Composite Layer for Stable Solid-State Li Metal Batteries

Hye Min Choi; Su Jin Jun; Jinhong Lee; Myung-Hyun Ryu; Hyeyoung Shin; Kyu-Nam Jung

doi:10.33961/jecst.2022.00829.e1

Search: J. Electrochem. Sci. Technol Search

CLOSE

J. Electrochem. Sci. Technol > Volume 14(3); 2023 > Article

Choi, Jun, Lee, Ryu, Shin, and Jung: Author Correction: UV-cured Polymer Solid Electrolyte Reinforced using a Ceramic-Polymer Composite Layer for Stable Solid-State Li Metal Batteries

Author Correction

Journal of Electrochemical Science and Technology 2023;14(3):301.

Published online: August 2, 2023

DOI: https://doi.org/10.33961/jecst.2022.00829.e1

Author Correction: UV-cured Polymer Solid Electrolyte Reinforced using a Ceramic-Polymer Composite Layer for Stable Solid-State Li Metal Batteries

Hye Min Choi^1,², Su Jin Jun¹, Jinhong Lee¹, Myung-Hyun Ryu¹, Hyeyoung Shin^2,^*, Kyu-Nam Jung^1,^*

¹Renewable Energy Institute, Korea Institute of Energy Research, 152 Gajeong-ro, Yuseong-gu, Daejeon 34129, Republic of Korea

²Graduate School of Energy Science and Technology, Chungnam National University, Yuseong-gu, Daejeon, 34134, Republic of Korea

^*E-mail address: shinhy@cnu.ac.kr (H. Shin), mitamire@kier.re.kr (K.-N. Jung)

This is an Open Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0/) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

This corrects the article "UV-cured Polymer Solid Electrolyte Reinforced using a Ceramic-Polymer Composite Layer for Stable Solid-State Li Metal Batteries" on page 85.

Correct the acknowledge statement as follows:

This research was supported by the Korea Institute of Energy Research (KIER, Project No. C2-2465) and Chungnam National University.

TOOLS